1. Chemical composition of 1.1213 Carbon Steel Plate
C | Si | Mn | P | S | Cu | Cr | Ni |
0.47-0.55 | 0.17-0.37 | 0.50-0.80 | ≤0.035 | ≤0.035 | ≤0.25 | ≤0.25 | ≤0.30 |
2. Equivalent Steel Grade of 1050 steel plate
DIN/EN | ASTM | GB | ISO | JIS |
C50E |
1050 | 50 |
C50E4 |
S50C |
3. Mechanical Properties
Tensile Strength (MPA) |
Yield Strength (MPA) |
Elongation (%) |
Reduction (%) |
Impact (Aku/J) |
Condition |
min. 630 | min. 375 | min. 14 | min. 40 |
/ |
Q+T |
Hardness annealed ≤207HB, Cold drawn ≤241HB.
4. Charateristics
The properties of SAE-AISI 1050 steel include three common variations. The property values on this page show ranges across all of them. For more specific values, follow the links immediately below. The graph bars on the material properties cards further below compare SAE-AISI 1050 steel to: wrought plain carbon steels (top), all iron alloys (middle), and the entire database (bottom).
5. Applications
This grade of steel is used for the manufacture of blades, brackets, brake discs, clips, clutches, springs, washers and gears and for a wide range of applications that can make use of its good combination of mechanical properties.